Indicates that image muting is turned on. High/1 (rising edge) = Mute image Low/0 = No effect When image muting is turned on, the display is blanked out with a solid black or blue color, or (on some projectors) with a test pattern or logo screen. Turns on image muting on the rising edge of the input. High/1 = Source selected Low/0 = Source not active The output remains high for as long as the corresponding source is active. Indicates the source that's currently selected. High/1 (rising edge) = Select source Low/0 = No effect Selects the corresponding source on the rising edge of the input. High/1 = Emergency message supported Low/0 = Emergency message not supported The emergency broadcast is used to display emergency alerts on the connected display via the Emergency Alert Code analog and Emergency Message serial. The output remains high for as long as emergency messages are supported. Indicates that the projector supports emergency notification. High/1 = Power is off Low/0 = Power is on The output remains high for as long as the projector is off. Indicates that the projector power is off. High/1 (rising edge) = Power off Low/0 = No effect Turns off power to the projector on the rising edge of the input.

High/1 = Power is on Low/0 = Power is off The output remains high for as long as the projector is on. Indicates that the projector power is on. High/1 (rising edge) = Power on Low/0 = No effect

Turns on power to the projector on the rising edge of the input. The output will remain high for as long as the projector is online. it's connected and communicating properly. Indicates whether the projector is online or offline with the control system i.e. Using the projector's built-in Web page or on-screen display on some models, the following parameters must be configured on the projector: 1) the IP address of the control system 2) the IP ID assigned in SIMPL Windows and 3) the port number (default 41794). A list of supported projectors and additional information can be found here.

The symbol can be used with any projector that displays the Crestron logo. The RoomView Connected Display symbol allows any projector that integrates with RoomView to connect directly to the control system, where it can be controlled even without RoomView interaction.

Master xpanel projector